Nissan Interstar L3H2 vs L3H3
The L3H3 is 256 mm10 in taller than the L3H2, and the same length and width. The L3H3 has the same load length at the floor and the same wheelbase.
VanCAD models the Nissan Interstar in 8 sizes (L1H1, L1H2, L2H2, L2H3, L3H2, L3H3, L4H2, L4H3), from 5,048 mm16 ft 7 in to 6,848 mm22 ft 6 in long and 2,307 mm7 ft 7 in to 2,815 mm9 ft 3 in tall, with front-wheel or rear-wheel drive. The Nissan Interstar is also sold as the Renault Master, the Vauxhall Movano (pre-2021), the Opel Movano (pre-2021) and the Nissan NV400.
These are two sizes of the same van, the Nissan Interstar.
Side profiles at one scale
- Nissan Interstar L3H2 FWD
- Nissan Interstar L3H3 FWD
- Both
Lined up at the rear doors. The drawings leave off the rear bumper, so this is the line the load space ends at.
Drawn from VanCAD's 3D models at one scale, with the ground lines level. The figures in the table are the manufacturers' published ones: read a measurement from the table, not the picture.
The published figures
| Measurement | Nissan Interstar L3H2 FWD | Nissan Interstar L3H3 FWD | Difference |
|---|---|---|---|
| Overall length | 6,198 mm20 ft 4 in | 6,198 mm20 ft 4 in | SameSame |
| Overall width (excluding mirrors) | 2,070 mm6 ft 9 in | 2,070 mm6 ft 9 in | SameSame |
| Overall height | 2,488 mm8 ft 2 in | 2,744 mm9 ft | 256 mm taller10 in taller |
| Wheelbase | 4,332 mm14 ft 3 in | 4,332 mm14 ft 3 in | SameSame |
| Rear overhang | 1,024 mm3 ft 4 in | 1,024 mm3 ft 4 in | SameSame |
| Ground clearance | 175 mm0 ft 7 in | 175 mm0 ft 7 in | SameSame |
| Side door opening | 1,270 mm4 ft 2 in | 1,270 mm4 ft 2 in | SameSame |
| Load length at floor | 3,733 mm12 ft 3 in | 3,733 mm12 ft 3 in | SameSame |
| Maximum internal load width | 1,765 mm5 ft 9 in | 1,765 mm5 ft 9 in | SameSame |
| Maximum internal load height | 1,894 mm6 ft 3 in | 2,144 mm7 ft | 250 mm higher10 in higher |
| Load floor height | 542 mm1 ft 9 in | 542 mm1 ft 9 in | SameSame |
| Kerb weight (approximate) | 2,191 kg4,830 lb | 2,231 kg4,919 lb | 40 kg heavier89 lb heavier |
| Gross vehicle weight (example rating) | 3,500 kg7,716 lb | 3,500 kg7,716 lb | SameSame |
| Payload (approximate) | 1,309 kg2,886 lb | 1,269 kg2,798 lb | 40 kg less88 lb less |
| Drive | Front-wheel driveFront-wheel drive | Front-wheel driveFront-wheel drive | SameSame |
| Design this van | Design this van |
The difference column reads the Nissan Interstar L3H3 FWD against the Nissan Interstar L3H2 FWD: "longer" means the Nissan Interstar L3H3 FWD is the longer of the two.
More comparisons
Other comparisons with the Nissan Interstar.
- Mercedes-Benz Sprinter vs Nissan Interstar
- Ford Transit vs Nissan Interstar
- Nissan Interstar vs Volkswagen Crafter
- Iveco Daily vs Nissan Interstar
- Fiat Ducato vs Nissan Interstar
- MAN TGE vs Nissan Interstar
- Nissan Interstar vs Peugeot Boxer
- Citroën Relay vs Nissan Interstar
- Citroën Jumper vs Nissan Interstar
- Nissan Interstar vs Toyota Proace Max
- Nissan Interstar vs Vauxhall Movano (2021 on)
- Nissan Interstar vs Opel Movano (2021 on)
How to read these figures
Kerb weight (curb weight in North America) is the unladen mass in running order (all fluids, a 90% full fuel tank and a 75 kg driver), for a base-specification panel van. It is researched and approximate: a real van with options fitted will weigh more, and VanCAD lets you edit the figure on your own design.
Gross vehicle weight is the maximum permitted total weight of the loaded van. Approximate payload is the example gross weight shown above minus our researched kerb weight. The kerb weight already includes a 75 kg driver. The remaining allowance covers the conversion, other occupants, water and luggage, plus any driver weight above 75 kg. Weight ratings, engines and options vary; check your own vehicle's weight plate and axle limits. A converted van's real remaining allowance comes from a weighbridge, weighed ready to travel.
Load length is the manufacturer's published floor length behind the bulkhead, measured at floor level in the bare van. Lining, battens and a false floor all take from it, and the figure says nothing about the height or width available above it.
Interior figures are the manufacturer's published load length at floor, maximum internal load width and maximum internal load height, where available. These are before conversion: lining, insulation and flooring reduce usable space, and maximum dimensions do not apply everywhere inside the van. Check your own vehicle before cutting or building. VanCAD's traced interior shapes are illustrative and are never used as published measurements.
VanCAD models the mainstream panel van bodies and drive layouts for each van, not every factory option. A maker may also sell four-wheel-drive, chassis-cab or crew-van versions that are not listed here, so anything on this page about which layouts a van comes in describes the versions VanCAD offers rather than the maker's full range.
Will your layout fit?
Open either van in the browser, place a bed, a kitchen and a shower at real millimetre sizes, and read back the weight you have added. Free, with no install.