Fiat Talento vs Toyota HiAce
This page compares the Fiat Talento L1H1 with the Toyota HiAce SWB. Choose any other size of either below. The Toyota HiAce is 304 mm1 ft shorter, 9 mmunder 1 in taller and 261 mm10 in narrower than the Fiat Talento. The Toyota HiAce has 463 mm1 ft 6 in more load length at the floor and a wheelbase 528 mm1 ft 9 in shorter.
VanCAD models the Fiat Talento in 4 sizes (L1H1, L1H2, L2H1, L2H2), from 4,999 mm16 ft 5 in to 5,399 mm17 ft 9 in long and 1,971 mm6 ft 6 in to 2,495 mm8 ft 2 in tall, with front-wheel drive. VanCAD models the Toyota HiAce in 4 sizes (SWB, SWB High Roof, SWB Wide, LWB), from 4,695 mm15 ft 5 in to 5,380 mm17 ft 8 in long and 1,980 mm6 ft 6 in to 2,285 mm7 ft 6 in tall, with rear-wheel drive. The Fiat Talento is also sold as the Renault Trafic, the Vauxhall Vivaro, the Opel Vivaro, the Nissan NV300 and the Nissan Primastar.
Side profiles at one scale
- Fiat Talento L1H1
- Toyota HiAce SWB
- Both
Lined up at the rear doors. The drawings leave off the rear bumper, so this is the line the load space ends at.
Drawn from VanCAD's 3D models at one scale, with the ground lines level. The figures in the table are the manufacturers' published ones: read a measurement from the table, not the picture.
The published figures
| Measurement | Fiat Talento L1H1 | Toyota HiAce SWB | Difference |
|---|---|---|---|
| Overall length | 4,999 mm16 ft 5 in | 4,695 mm15 ft 5 in | 304 mm shorter1 ft shorter |
| Overall width (excluding mirrors) | 1,956 mm6 ft 5 in | 1,695 mm5 ft 7 in | 261 mm narrower10 in narrower |
| Overall height | 1,971 mm6 ft 6 in | 1,980 mm6 ft 6 in | 9 mm tallerunder 1 in taller |
| Wheelbase | 3,098 mm10 ft 2 in | 2,570 mm8 ft 5 in | 528 mm shorter1 ft 9 in shorter |
| Rear overhang | 968 mm3 ft 2 in | 1,050 mm3 ft 5 in | 82 mm longer3 in longer |
| Ground clearance | 160 mm0 ft 6 in | 195 mm0 ft 8 in | 35 mm more1 in more |
| Side door opening | 1,030 mm3 ft 5 in | 1,180 mm3 ft 10 in | 150 mm wider6 in wider |
| Load length at floor | 2,537 mm8 ft 4 in | 3,000 mm9 ft 10 in | 463 mm longer1 ft 6 in longer |
| Maximum internal load width | 1,662 mm5 ft 5 in | 1,545 mm5 ft 1 in | 117 mm narrower5 in narrower |
| Maximum internal load height | 1,387 mm4 ft 7 in | 1,335 mm4 ft 5 in | 52 mm lower2 in lower |
| Load floor height | 552 mm1 ft 10 in | 620 mm2 ft | 68 mm higher3 in higher |
| Kerb weight (approximate) | 1,736 kg3,827 lb | 1,855 kg4,090 lb | 119 kg heavier263 lb heavier |
| Gross vehicle weight (example rating) | 2,740 kg6,041 lb | 3,195 kg7,044 lb | 455 kg more1,003 lb more |
| Payload (approximate) | 1,004 kg2,213 lb | 1,340 kg2,954 lb | 336 kg more741 lb more |
| Drive | Front-wheel driveFront-wheel drive | Rear-wheel driveRear-wheel drive | DifferentDifferent |
| Design this van | Design this van |
The difference column reads the Toyota HiAce SWB against the Fiat Talento L1H1: "longer" means the Toyota HiAce SWB is the longer of the two.
More comparisons
Other comparisons with the Fiat Talento or the Toyota HiAce.
- Toyota HiAce vs Volkswagen Transporter (T6.1)
- Fiat Talento vs Volkswagen Transporter (T6.1)
- Toyota HiAce vs Volkswagen Transporter (T7)
- Fiat Talento vs Volkswagen Transporter (T7)
- Renault Trafic vs Toyota HiAce
- Toyota HiAce vs Vauxhall Vivaro
- Opel Vivaro vs Toyota HiAce
- Nissan NV300 vs Toyota HiAce
- Nissan Primastar vs Toyota HiAce
- Ford Transit Custom vs Toyota HiAce
- Fiat Talento vs Ford Transit Custom
- Toyota HiAce vs Toyota Proace Max
How to read these figures
Kerb weight (curb weight in North America) is the unladen mass in running order (all fluids, a 90% full fuel tank and a 75 kg driver), for a base-specification panel van. It is researched and approximate: a real van with options fitted will weigh more, and VanCAD lets you edit the figure on your own design.
Gross vehicle weight is the maximum permitted total weight of the loaded van. Approximate payload is the example gross weight shown above minus our researched kerb weight. The kerb weight already includes a 75 kg driver. The remaining allowance covers the conversion, other occupants, water and luggage, plus any driver weight above 75 kg. Weight ratings, engines and options vary; check your own vehicle's weight plate and axle limits. A converted van's real remaining allowance comes from a weighbridge, weighed ready to travel.
Load length is the manufacturer's published floor length behind the bulkhead, measured at floor level in the bare van. Lining, battens and a false floor all take from it, and the figure says nothing about the height or width available above it.
Interior figures are the manufacturer's published load length at floor, maximum internal load width and maximum internal load height, where available. These are before conversion: lining, insulation and flooring reduce usable space, and maximum dimensions do not apply everywhere inside the van. Check your own vehicle before cutting or building. VanCAD's traced interior shapes are illustrative and are never used as published measurements.
VanCAD models the mainstream panel van bodies and drive layouts for each van, not every factory option. A maker may also sell four-wheel-drive, chassis-cab or crew-van versions that are not listed here, so anything on this page about which layouts a van comes in describes the versions VanCAD offers rather than the maker's full range.
Will your layout fit?
Open either van in the browser, place a bed, a kitchen and a shower at real millimetre sizes, and read back the weight you have added. Free, with no install.