Ford Transit Custom L1H1 vs L2H1
The L2H1 is 400 mm1 ft 4 in longer and 2 mmunder 1 in lower than the L1H1, and the same width. The L2H1 has 400 mm1 ft 4 in more load length at the floor and a wheelbase 400 mm1 ft 4 in longer.
VanCAD models the Ford Transit Custom in 2 sizes (L1H1, L2H1), from 5,050 mm16 ft 7 in to 5,450 mm17 ft 11 in long and 1,981 mm6 ft 6 in to 1,983 mm6 ft 6 in tall, with front-wheel drive. The Ford Transit Custom is also sold as the Volkswagen Transporter (T7).
These are two sizes of the same van, the Ford Transit Custom.
Side profiles at one scale
- Ford Transit Custom L1H1
- Ford Transit Custom L2H1
- Both
Lined up at the rear doors. The drawings leave off the rear bumper, so this is the line the load space ends at.
Drawn from VanCAD's 3D models at one scale, with the ground lines level. The figures in the table are the manufacturers' published ones: read a measurement from the table, not the picture.
The published figures
| Measurement | Ford Transit Custom L1H1 | Ford Transit Custom L2H1 | Difference |
|---|---|---|---|
| Overall length | 5,050 mm16 ft 7 in | 5,450 mm17 ft 11 in | 400 mm longer1 ft 4 in longer |
| Overall width (excluding mirrors) | 2,032 mm6 ft 8 in | 2,032 mm6 ft 8 in | SameSame |
| Overall height | 1,983 mm6 ft 6 in | 1,981 mm6 ft 6 in | 2 mm lowerunder 1 in lower |
| Wheelbase | 3,100 mm10 ft 2 in | 3,500 mm11 ft 6 in | 400 mm longer1 ft 4 in longer |
| Rear overhang | 992 mm3 ft 3 in | 992 mm3 ft 3 in | SameSame |
| Ground clearance | -- | -- | -- |
| Side door opening | 1,030 mm3 ft 5 in | 1,030 mm3 ft 5 in | SameSame |
| Load length at floor | 2,602 mm8 ft 6 in | 3,002 mm9 ft 10 in | 400 mm longer1 ft 4 in longer |
| Maximum internal load width | 1,777 mm5 ft 10 in | 1,777 mm5 ft 10 in | SameSame |
| Maximum internal load height | 1,433 mm4 ft 8 in | 1,433 mm4 ft 8 in | SameSame |
| Load floor height | 585 mm1 ft 11 in | 585 mm1 ft 11 in | SameSame |
| Kerb weight (approximate) | 1,893 kg4,173 lb | 1,939 kg4,275 lb | 46 kg heavier102 lb heavier |
| Gross vehicle weight (example rating) | 3,225 kg7,110 lb | 3,225 kg7,110 lb | SameSame |
| Payload (approximate) | 1,332 kg2,937 lb | 1,286 kg2,835 lb | 46 kg less102 lb less |
| Drive | Front-wheel driveFront-wheel drive | Front-wheel driveFront-wheel drive | SameSame |
| Design this van | Design this van |
The difference column reads the Ford Transit Custom L2H1 against the Ford Transit Custom L1H1: "longer" means the Ford Transit Custom L2H1 is the longer of the two.
More comparisons
Other comparisons with the Ford Transit Custom.
- Ford Transit Custom vs Volkswagen Transporter (T6.1)
- Ford Transit Custom vs Renault Trafic
- Ford Transit Custom vs Toyota HiAce
- Ford Transit Custom vs Vauxhall Vivaro
- Ford Transit Custom vs Opel Vivaro
- Ford Transit Custom vs Nissan NV300
- Ford Transit Custom vs Nissan Primastar
- Fiat Talento vs Ford Transit Custom
- Ford Transit Custom vs Ford Transit
- Ford Transit Connect vs Ford Transit Custom
- Ford Transit Custom vs Volkswagen Transporter (T7)
How to read these figures
Kerb weight (curb weight in North America) is the unladen mass in running order (all fluids, a 90% full fuel tank and a 75 kg driver), for a base-specification panel van. It is researched and approximate: a real van with options fitted will weigh more, and VanCAD lets you edit the figure on your own design.
Gross vehicle weight is the maximum permitted total weight of the loaded van. Approximate payload is the example gross weight shown above minus our researched kerb weight. The kerb weight already includes a 75 kg driver. The remaining allowance covers the conversion, other occupants, water and luggage, plus any driver weight above 75 kg. Weight ratings, engines and options vary; check your own vehicle's weight plate and axle limits. A converted van's real remaining allowance comes from a weighbridge, weighed ready to travel.
Load length is the manufacturer's published floor length behind the bulkhead, measured at floor level in the bare van. Lining, battens and a false floor all take from it, and the figure says nothing about the height or width available above it.
Interior figures are the manufacturer's published load length at floor, maximum internal load width and maximum internal load height, where available. These are before conversion: lining, insulation and flooring reduce usable space, and maximum dimensions do not apply everywhere inside the van. Check your own vehicle before cutting or building. VanCAD's traced interior shapes are illustrative and are never used as published measurements.
VanCAD models the mainstream panel van bodies and drive layouts for each van, not every factory option. A maker may also sell four-wheel-drive, chassis-cab or crew-van versions that are not listed here, so anything on this page about which layouts a van comes in describes the versions VanCAD offers rather than the maker's full range.
Will your layout fit?
Open either van in the browser, place a bed, a kitchen and a shower at real millimetre sizes, and read back the weight you have added. Free, with no install.