VanCAD
Open the app

Ford Transit vs Vauxhall Movano (pre-2021)

This page compares the Ford Transit L3H2 FWD with the Vauxhall Movano (pre-2021) L3H2 FWD. Choose any other size of either below. The Vauxhall Movano (pre-2021) is 217 mm9 in longer, 59 mm2 in lower and 11 mmunder 1 in wider than the Ford Transit. The Vauxhall Movano (pre-2021) has 239 mm9 in more load length at the floor and a wheelbase 582 mm1 ft 11 in longer.

VanCAD models the Ford Transit in 5 sizes (L2H2, L2H3, L3H2, L3H3, L4H3), from 5,531 mm18 ft 2 in to 6,704 mm22 ft long and 2,547 mm8 ft 4 in to 2,789 mm9 ft 2 in tall, with front-wheel, rear-wheel or all-wheel drive. VanCAD models the Vauxhall Movano (pre-2021) in 8 sizes (L1H1, L1H2, L2H2, L2H3, L3H2, L3H3, L4H2, L4H3), from 5,048 mm16 ft 7 in to 6,848 mm22 ft 6 in long and 2,307 mm7 ft 7 in to 2,815 mm9 ft 3 in tall, with front-wheel or rear-wheel drive. The Vauxhall Movano (pre-2021) is also sold as the Renault Master, the Opel Movano (pre-2021), the Nissan NV400 and the Nissan Interstar.

First van

Ford Transit L3H2 FWD

Full dimensions
Second van

Vauxhall Movano (pre-2021) L3H2 FWD

Full dimensions

Side profiles at one scale

View
Line up by
Ford Transit L3H2 FWD
Side profile of the Ford Transit L3H2 FWD
Vauxhall Movano (pre-2021) L3H2 FWD
Side profile of the Vauxhall Movano (pre-2021) L3H2 FWD
  • Ford Transit L3H2 FWD
  • Vauxhall Movano (pre-2021) L3H2 FWD
  • Both

Lined up at the rear doors. The drawings leave off the rear bumper, so this is the line the load space ends at.

Drawn from VanCAD's 3D models at one scale, with the ground lines level. The figures in the table are the manufacturers' published ones: read a measurement from the table, not the picture.

Side profiles at one scale

The published figures

Ford Transit L3H2 FWD and Vauxhall Movano (pre-2021) L3H2 FWD compared
MeasurementFord Transit L3H2 FWDVauxhall Movano (pre-2021) L3H2 FWDDifference
Overall length5,981 mm19 ft 7 in6,198 mm20 ft 4 in217 mm longer9 in longer
Overall width (excluding mirrors)2,059 mm6 ft 9 in2,070 mm6 ft 9 in11 mm widerunder 1 in wider
Overall height2,547 mm8 ft 4 in2,488 mm8 ft 2 in59 mm lower2 in lower
Wheelbase3,750 mm12 ft 4 in4,332 mm14 ft 3 in582 mm longer1 ft 11 in longer
Rear overhang1,190 mm3 ft 11 in1,024 mm3 ft 4 in166 mm shorter7 in shorter
Ground clearance174 mm0 ft 7 in175 mm0 ft 7 in1 mm moreunder 1 in more
Side door opening1,300 mm4 ft 3 in1,270 mm4 ft 2 in30 mm narrower1 in narrower
Load length at floor3,494 mm11 ft 6 in3,733 mm12 ft 3 in239 mm longer9 in longer
Maximum internal load width1,784 mm5 ft 10 in1,765 mm5 ft 9 in19 mm narrower1 in narrower
Maximum internal load height1,886 mm6 ft 2 in1,894 mm6 ft 3 in8 mm higherunder 1 in higher
Load floor height613 mm2 ft542 mm1 ft 9 in71 mm lower3 in lower
Kerb weight (approximate)2,149 kg4,738 lb2,191 kg4,830 lb42 kg heavier92 lb heavier
Gross vehicle weight (example rating)3,500 kg7,716 lb3,500 kg7,716 lbSameSame
Payload (approximate)1,351 kg2,978 lb1,309 kg2,886 lb42 kg less92 lb less
DriveFront-wheel driveFront-wheel driveFront-wheel driveFront-wheel driveSameSame
Design this vanDesign this van

The difference column reads the Vauxhall Movano (pre-2021) L3H2 FWD against the Ford Transit L3H2 FWD: "longer" means the Vauxhall Movano (pre-2021) L3H2 FWD is the longer of the two.

How to read these figures

Kerb weight (curb weight in North America) is the unladen mass in running order (all fluids, a 90% full fuel tank and a 75 kg driver), for a base-specification panel van. It is researched and approximate: a real van with options fitted will weigh more, and VanCAD lets you edit the figure on your own design.

Gross vehicle weight is the maximum permitted total weight of the loaded van. Approximate payload is the example gross weight shown above minus our researched kerb weight. The kerb weight already includes a 75 kg driver. The remaining allowance covers the conversion, other occupants, water and luggage, plus any driver weight above 75 kg. Weight ratings, engines and options vary; check your own vehicle's weight plate and axle limits. A converted van's real remaining allowance comes from a weighbridge, weighed ready to travel.

Load length is the manufacturer's published floor length behind the bulkhead, measured at floor level in the bare van. Lining, battens and a false floor all take from it, and the figure says nothing about the height or width available above it.

Interior figures are the manufacturer's published load length at floor, maximum internal load width and maximum internal load height, where available. These are before conversion: lining, insulation and flooring reduce usable space, and maximum dimensions do not apply everywhere inside the van. Check your own vehicle before cutting or building. VanCAD's traced interior shapes are illustrative and are never used as published measurements.

VanCAD models the mainstream panel van bodies and drive layouts for each van, not every factory option. A maker may also sell four-wheel-drive, chassis-cab or crew-van versions that are not listed here, so anything on this page about which layouts a van comes in describes the versions VanCAD offers rather than the maker's full range.

Will your layout fit?

Open either van in the browser, place a bed, a kitchen and a shower at real millimetre sizes, and read back the weight you have added. Free, with no install.