VanCAD
Open the app

Opel Vivaro dimensions

3rd gen (X82, 2014-2021)

Published exterior dimensions for all 4 Opel Vivaro panel van sizes, with the wheelbase, the load floor height and the unladen weight you start a conversion from. Every size below can be loaded into the free 3D planner.

Opel and Vauxhall are two names for one company, so the Vivaro sold under this badge in Europe and the Vivaro sold in Britain are a single vehicle - a Renault Trafic with a different grille. That has a practical consequence worth stating plainly: a measurement taken from a European Vivaro can be trusted on a British one, and parts listings for either will fit. The figure to start a layout from is the load floor, which sits 552 mm off the ground on each body in the range, so a design drawn to a particular standing height survives changing your mind about which length to buy.

The Opel Vivaro is the same vehicle as the Renault Trafic, Vauxhall Vivaro, Nissan NV300, Nissan Primastar and Fiat Talento. Same body, same dimensions, same weight; a different badge and grille.

See also: Renault Trafic dimensions, Vauxhall Vivaro dimensions, Nissan NV300 dimensions, Nissan Primastar dimensions, Fiat Talento dimensions.

Opel Vivaro L1H1

The Opel Vivaro L1H1 is 4,999 mm (16 ft 5 in) long, 1,956 mm (6 ft 5 in) wide and 1,971 mm (6 ft 6 in) tall, on a 3,098 mm (10 ft 2 in) wheelbase, with a load floor 552 mm (1 ft 10 in) off the ground, and 2,537 mm (8 ft 4 in) of floor behind the bulkhead. It weighs about 1,736 kg (3,827 lb) unladen.

Also known as: Short wheelbase, standard roof.

Front-wheel drive

Side elevation of a Opel Vivaro L1H1
Opel Vivaro L1H1 exterior dimensions
MeasurementMetricImperial
Overall length4,999 mm16 ft 5 in
Overall width (excluding mirrors)1,956 mm6 ft 5 in
Overall height1,971 mm6 ft 6 in
Wheelbase3,098 mm10 ft 2 in
Side door opening1,030 mm3 ft 5 in
Load length at floor2,537 mm8 ft 4 in
Load floor height552 mm1 ft 10 in
Kerb weight (approximate)1,736 kg3,827 lb

Opel Vivaro L1H2

The Opel Vivaro L1H2 is 4,999 mm (16 ft 5 in) long, 1,956 mm (6 ft 5 in) wide and 2,495 mm (8 ft 2 in) tall, on a 3,098 mm (10 ft 2 in) wheelbase, with a load floor 552 mm (1 ft 10 in) off the ground, and 2,537 mm (8 ft 4 in) of floor behind the bulkhead. It weighs about 1,835 kg (4,045 lb) unladen.

Also known as: Short wheelbase, high roof.

Front-wheel drive

Side elevation of a Opel Vivaro L1H2
Opel Vivaro L1H2 exterior dimensions
MeasurementMetricImperial
Overall length4,999 mm16 ft 5 in
Overall width (excluding mirrors)1,956 mm6 ft 5 in
Overall height2,495 mm8 ft 2 in
Wheelbase3,098 mm10 ft 2 in
Side door opening1,030 mm3 ft 5 in
Load length at floor2,537 mm8 ft 4 in
Load floor height552 mm1 ft 10 in
Kerb weight (approximate)1,835 kg4,045 lb

Opel Vivaro L2H1

The Opel Vivaro L2H1 is 5,399 mm (17 ft 9 in) long, 1,956 mm (6 ft 5 in) wide and 1,971 mm (6 ft 6 in) tall, on a 3,498 mm (11 ft 6 in) wheelbase, with a load floor 552 mm (1 ft 10 in) off the ground, and 2,937 mm (9 ft 8 in) of floor behind the bulkhead. It weighs about 1,766 kg (3,893 lb) unladen.

Also known as: Long wheelbase, standard roof.

Front-wheel drive

Side elevation of a Opel Vivaro L2H1
Opel Vivaro L2H1 exterior dimensions
MeasurementMetricImperial
Overall length5,399 mm17 ft 9 in
Overall width (excluding mirrors)1,956 mm6 ft 5 in
Overall height1,971 mm6 ft 6 in
Wheelbase3,498 mm11 ft 6 in
Side door opening1,030 mm3 ft 5 in
Load length at floor2,937 mm9 ft 8 in
Load floor height552 mm1 ft 10 in
Kerb weight (approximate)1,766 kg3,893 lb

Opel Vivaro L2H2

The Opel Vivaro L2H2 is 5,399 mm (17 ft 9 in) long, 1,956 mm (6 ft 5 in) wide and 2,495 mm (8 ft 2 in) tall, on a 3,498 mm (11 ft 6 in) wheelbase, with a load floor 552 mm (1 ft 10 in) off the ground, and 2,937 mm (9 ft 8 in) of floor behind the bulkhead. It weighs about 1,895 kg (4,178 lb) unladen.

Also known as: Long wheelbase, high roof.

Front-wheel drive

Side elevation of a Opel Vivaro L2H2
Opel Vivaro L2H2 exterior dimensions
MeasurementMetricImperial
Overall length5,399 mm17 ft 9 in
Overall width (excluding mirrors)1,956 mm6 ft 5 in
Overall height2,495 mm8 ft 2 in
Wheelbase3,498 mm11 ft 6 in
Side door opening1,030 mm3 ft 5 in
Load length at floor2,937 mm9 ft 8 in
Load floor height552 mm1 ft 10 in
Kerb weight (approximate)1,895 kg4,178 lb

Every Opel Vivaro version, side by side

4 sizes, with the manufacturer's published overall figures side by side. Each one is drawn and specified in full above, in both metric and imperial.

Opel Vivaro exterior dimensions by version
VersionLengthWidthHeightWheelbaseLoad lengthLoad floorKerb weight
L1H14,999 mm16 ft 5 in1,956 mm6 ft 5 in1,971 mm6 ft 6 in3,098 mm10 ft 2 in2,537 mm8 ft 4 in552 mm1 ft 10 in1,736 kg3,827 lb
L1H24,999 mm16 ft 5 in1,956 mm6 ft 5 in2,495 mm8 ft 2 in3,098 mm10 ft 2 in2,537 mm8 ft 4 in552 mm1 ft 10 in1,835 kg4,045 lb
L2H15,399 mm17 ft 9 in1,956 mm6 ft 5 in1,971 mm6 ft 6 in3,498 mm11 ft 6 in2,937 mm9 ft 8 in552 mm1 ft 10 in1,766 kg3,893 lb
L2H25,399 mm17 ft 9 in1,956 mm6 ft 5 in2,495 mm8 ft 2 in3,498 mm11 ft 6 in2,937 mm9 ft 8 in552 mm1 ft 10 in1,895 kg4,178 lb

Lengths exclude mirrors. Kerb weight is approximate - see how these figures were sourced at the bottom of the page.

How to read these figures

Kerb weights are researched from published Renault Trafic data - the same vehicle, read on 18 August 2026. Basis: dCi 90/95 Business, FWD, 2.74-3.02 t GVW - the base trim, which is the lowest of the three Renault publishes (Business / Business+ / Sport).

Kerb weight (curb weight in North America) is the unladen mass in running order (all fluids, a 90% full fuel tank and a 75 kg driver), for a base-specification panel van at around 3.5 t gross. It is researched and approximate: a real van with options fitted will weigh more, and VanCAD lets you edit the figure on your own design.

Load length is the manufacturer's published floor length behind the bulkhead, measured at floor level in the bare van. Lining, battens and a false floor all take from it, and the figure says nothing about the height or width available above it.

One interior figure is published here, and it is the manufacturer's own: the load length at floor. Everything else about the inside of the van is deliberately absent. VanCAD's interior shapes come from traced reference models, so our own figures for load height, load width or the gap between the wheel arches would be wrong at the precision somebody cutting a bed frame needs, and a cited-and-wrong number is worse than none. Whether a given bed, shower or bike fits is a question the 3D tool answers by putting it in the van.

VanCAD models the mainstream panel van bodies and drive layouts for each van, not every factory option. A maker may also sell four-wheel-drive, chassis-cab or crew-van versions that are not listed here, so anything on this page about which layouts a van comes in describes the versions VanCAD offers rather than the maker's full range.

Source: globalvans.co.uk

Will your layout fit?

Load a Opel Vivaro into the browser, place a bed, a kitchen and a shower at real millimetre sizes, and read back the weight you have added. Free, with no install.