VanCAD
Open the app

Peugeot Boxer dimensions

X290 (2014-present, 2021 facelift)

Published exterior dimensions for all 7 Peugeot Boxer panel van sizes, with the wheelbase, the load floor height and the unladen weight you start a conversion from. Every size below can be loaded into the free 3D planner.

The Boxer is Peugeot's badge on the same van Fiat sells as the Ducato, and the two are identical where it matters to a build. What tends to decide it is the deal and the dealer, not the van. Worth knowing before you commit to a layout: every body here is modelled front-wheel drive, so there is no drive-layout choice to make and no rear-wheel-drive floor penalty to design around. Load floors are 535 mm to 550 mm across the range, the lowest of any van on this site, and the seven bodies span 4,963 mm to 6,363 mm.

The Peugeot Boxer is the same vehicle as the Fiat Ducato, Citroën Relay, Citroën Jumper, RAM Promaster, Toyota Proace Max, Vauxhall Movano (2021 on) and Opel Movano (2021 on). Same body, same dimensions, same weight; a different badge and grille.

See also: Fiat Ducato dimensions, Citroën Relay dimensions, Citroën Jumper dimensions, RAM Promaster dimensions, Toyota Proace Max dimensions, Vauxhall Movano (2021 on) dimensions, Opel Movano (2021 on) dimensions.

Peugeot Boxer L1H1

The Peugeot Boxer L1H1 is 4,963 mm (16 ft 3 in) long, 2,050 mm (6 ft 9 in) wide and 2,254 mm (7 ft 5 in) tall, on a 3,000 mm (9 ft 10 in) wheelbase, with a load floor 535 mm (1 ft 9 in) off the ground, and 2,670 mm (8 ft 9 in) of floor behind the bulkhead. It weighs about 1,940 kg (4,277 lb) unladen.

Also known as: Short wheelbase, low roof.

Front-wheel drive

Side elevation of a Peugeot Boxer L1H1
Peugeot Boxer L1H1 exterior dimensions
MeasurementMetricImperial
Overall length4,963 mm16 ft 3 in
Overall width (excluding mirrors)2,050 mm6 ft 9 in
Overall height2,254 mm7 ft 5 in
Wheelbase3,000 mm9 ft 10 in
Side door opening1,250 mm4 ft 1 in
Load length at floor2,670 mm8 ft 9 in
Load floor height535 mm1 ft 9 in
Kerb weight (approximate)1,940 kg4,277 lb

Peugeot Boxer L2H1

The Peugeot Boxer L2H1 is 5,413 mm (17 ft 9 in) long, 2,050 mm (6 ft 9 in) wide and 2,254 mm (7 ft 5 in) tall, on a 3,450 mm (11 ft 4 in) wheelbase, with a load floor 535 mm (1 ft 9 in) off the ground, and 3,120 mm (10 ft 3 in) of floor behind the bulkhead. It weighs about 1,980 kg (4,365 lb) unladen.

Also known as: Medium wheelbase, low roof.

Front-wheel drive

Side elevation of a Peugeot Boxer L2H1
Peugeot Boxer L2H1 exterior dimensions
MeasurementMetricImperial
Overall length5,413 mm17 ft 9 in
Overall width (excluding mirrors)2,050 mm6 ft 9 in
Overall height2,254 mm7 ft 5 in
Wheelbase3,450 mm11 ft 4 in
Side door opening1,250 mm4 ft 1 in
Load length at floor3,120 mm10 ft 3 in
Load floor height535 mm1 ft 9 in
Kerb weight (approximate)1,980 kg4,365 lb

Peugeot Boxer L2H2

The Peugeot Boxer L2H2 is 5,413 mm (17 ft 9 in) long, 2,050 mm (6 ft 9 in) wide and 2,522 mm (8 ft 3 in) tall, on a 3,450 mm (11 ft 4 in) wheelbase, with a load floor 535 mm (1 ft 9 in) off the ground, and 3,120 mm (10 ft 3 in) of floor behind the bulkhead. It weighs about 2,020 kg (4,453 lb) unladen.

Also known as: Medium wheelbase, medium roof.

Front-wheel drive

Side elevation of a Peugeot Boxer L2H2
Peugeot Boxer L2H2 exterior dimensions
MeasurementMetricImperial
Overall length5,413 mm17 ft 9 in
Overall width (excluding mirrors)2,050 mm6 ft 9 in
Overall height2,522 mm8 ft 3 in
Wheelbase3,450 mm11 ft 4 in
Side door opening1,250 mm4 ft 1 in
Load length at floor3,120 mm10 ft 3 in
Load floor height535 mm1 ft 9 in
Kerb weight (approximate)2,020 kg4,453 lb

Peugeot Boxer L3H2

The Peugeot Boxer L3H2 is 5,998 mm (19 ft 8 in) long, 2,050 mm (6 ft 9 in) wide and 2,522 mm (8 ft 3 in) tall, on a 4,035 mm (13 ft 3 in) wheelbase, with a load floor 550 mm (1 ft 10 in) off the ground, and 3,705 mm (12 ft 2 in) of floor behind the bulkhead. It weighs about 2,095 kg (4,619 lb) unladen.

Also known as: Long wheelbase, medium roof.

Front-wheel drive

Side elevation of a Peugeot Boxer L3H2
Peugeot Boxer L3H2 exterior dimensions
MeasurementMetricImperial
Overall length5,998 mm19 ft 8 in
Overall width (excluding mirrors)2,050 mm6 ft 9 in
Overall height2,522 mm8 ft 3 in
Wheelbase4,035 mm13 ft 3 in
Side door opening1,250 mm4 ft 1 in
Load length at floor3,705 mm12 ft 2 in
Load floor height550 mm1 ft 10 in
Kerb weight (approximate)2,095 kg4,619 lb

Peugeot Boxer L3H3

The Peugeot Boxer L3H3 is 5,998 mm (19 ft 8 in) long, 2,050 mm (6 ft 9 in) wide and 2,760 mm (9 ft 1 in) tall, on a 4,035 mm (13 ft 3 in) wheelbase, with a load floor 550 mm (1 ft 10 in) off the ground, and 3,705 mm (12 ft 2 in) of floor behind the bulkhead. It weighs about 2,130 kg (4,696 lb) unladen.

Also known as: Long wheelbase, high roof.

Front-wheel drive

Side elevation of a Peugeot Boxer L3H3
Peugeot Boxer L3H3 exterior dimensions
MeasurementMetricImperial
Overall length5,998 mm19 ft 8 in
Overall width (excluding mirrors)2,050 mm6 ft 9 in
Overall height2,760 mm9 ft 1 in
Wheelbase4,035 mm13 ft 3 in
Side door opening1,250 mm4 ft 1 in
Load length at floor3,705 mm12 ft 2 in
Load floor height550 mm1 ft 10 in
Kerb weight (approximate)2,130 kg4,696 lb

Peugeot Boxer L4H2

The Peugeot Boxer L4H2 is 6,363 mm (20 ft 11 in) long, 2,050 mm (6 ft 9 in) wide and 2,522 mm (8 ft 3 in) tall, on a 4,035 mm (13 ft 3 in) wheelbase, with a load floor 550 mm (1 ft 10 in) off the ground, and 4,070 mm (13 ft 4 in) of floor behind the bulkhead. It weighs about 2,235 kg (4,927 lb) unladen.

Also known as: Extra-long wheelbase, medium roof.

Front-wheel drive

Side elevation of a Peugeot Boxer L4H2
Peugeot Boxer L4H2 exterior dimensions
MeasurementMetricImperial
Overall length6,363 mm20 ft 11 in
Overall width (excluding mirrors)2,050 mm6 ft 9 in
Overall height2,522 mm8 ft 3 in
Wheelbase4,035 mm13 ft 3 in
Side door opening1,250 mm4 ft 1 in
Load length at floor4,070 mm13 ft 4 in
Load floor height550 mm1 ft 10 in
Kerb weight (approximate)2,235 kg4,927 lb

Peugeot Boxer L4H3

The Peugeot Boxer L4H3 is 6,363 mm (20 ft 11 in) long, 2,050 mm (6 ft 9 in) wide and 2,760 mm (9 ft 1 in) tall, on a 4,035 mm (13 ft 3 in) wheelbase, with a load floor 550 mm (1 ft 10 in) off the ground, and 4,070 mm (13 ft 4 in) of floor behind the bulkhead. It weighs about 2,270 kg (5,004 lb) unladen.

Also known as: Extra-long wheelbase, high roof.

Front-wheel drive

Side elevation of a Peugeot Boxer L4H3
Peugeot Boxer L4H3 exterior dimensions
MeasurementMetricImperial
Overall length6,363 mm20 ft 11 in
Overall width (excluding mirrors)2,050 mm6 ft 9 in
Overall height2,760 mm9 ft 1 in
Wheelbase4,035 mm13 ft 3 in
Side door opening1,250 mm4 ft 1 in
Load length at floor4,070 mm13 ft 4 in
Load floor height550 mm1 ft 10 in
Kerb weight (approximate)2,270 kg5,004 lb

Every Peugeot Boxer version, side by side

7 sizes, with the manufacturer's published overall figures side by side. Each one is drawn and specified in full above, in both metric and imperial.

Peugeot Boxer exterior dimensions by version
VersionLengthWidthHeightWheelbaseLoad lengthLoad floorKerb weight
L1H14,963 mm16 ft 3 in2,050 mm6 ft 9 in2,254 mm7 ft 5 in3,000 mm9 ft 10 in2,670 mm8 ft 9 in535 mm1 ft 9 in1,940 kg4,277 lb
L2H15,413 mm17 ft 9 in2,050 mm6 ft 9 in2,254 mm7 ft 5 in3,450 mm11 ft 4 in3,120 mm10 ft 3 in535 mm1 ft 9 in1,980 kg4,365 lb
L2H25,413 mm17 ft 9 in2,050 mm6 ft 9 in2,522 mm8 ft 3 in3,450 mm11 ft 4 in3,120 mm10 ft 3 in535 mm1 ft 9 in2,020 kg4,453 lb
L3H25,998 mm19 ft 8 in2,050 mm6 ft 9 in2,522 mm8 ft 3 in4,035 mm13 ft 3 in3,705 mm12 ft 2 in550 mm1 ft 10 in2,095 kg4,619 lb
L3H35,998 mm19 ft 8 in2,050 mm6 ft 9 in2,760 mm9 ft 1 in4,035 mm13 ft 3 in3,705 mm12 ft 2 in550 mm1 ft 10 in2,130 kg4,696 lb
L4H26,363 mm20 ft 11 in2,050 mm6 ft 9 in2,522 mm8 ft 3 in4,035 mm13 ft 3 in4,070 mm13 ft 4 in550 mm1 ft 10 in2,235 kg4,927 lb
L4H36,363 mm20 ft 11 in2,050 mm6 ft 9 in2,760 mm9 ft 1 in4,035 mm13 ft 3 in4,070 mm13 ft 4 in550 mm1 ft 10 in2,270 kg5,004 lb

Lengths exclude mirrors. Kerb weight is approximate - see how these figures were sourced at the bottom of the page.

How to read these figures

Kerb weights are researched from published Fiat Ducato data - the same vehicle, read on 5 August 2026. Basis: 2.2 MultiJet 120 diesel, 3500 kg (35) GVW, FWD, base spec.

Kerb weight (curb weight in North America) is the unladen mass in running order (all fluids, a 90% full fuel tank and a 75 kg driver), for a base-specification panel van at around 3.5 t gross. It is researched and approximate: a real van with options fitted will weigh more, and VanCAD lets you edit the figure on your own design.

Load length is the manufacturer's published floor length behind the bulkhead, measured at floor level in the bare van. Lining, battens and a false floor all take from it, and the figure says nothing about the height or width available above it.

One interior figure is published here, and it is the manufacturer's own: the load length at floor. Everything else about the inside of the van is deliberately absent. VanCAD's interior shapes come from traced reference models, so our own figures for load height, load width or the gap between the wheel arches would be wrong at the precision somebody cutting a bed frame needs, and a cited-and-wrong number is worse than none. Whether a given bed, shower or bike fits is a question the 3D tool answers by putting it in the van.

VanCAD models the mainstream panel van bodies and drive layouts for each van, not every factory option. A maker may also sell four-wheel-drive, chassis-cab or crew-van versions that are not listed here, so anything on this page about which layouts a van comes in describes the versions VanCAD offers rather than the maker's full range.

Source: www.fiatprofessional.com

Will your layout fit?

Load a Peugeot Boxer into the browser, place a bed, a kitchen and a shower at real millimetre sizes, and read back the weight you have added. Free, with no install.