VanCAD
Open the app

Fiat Ducato dimensions

X290 (2014-present, 2021 facelift)

Published exterior dimensions for all 7 Fiat Ducato panel van sizes, with the wheelbase, the load floor height and the unladen weight you start a conversion from. Every size below can be loaded into the free 3D planner.

The Ducato is one of the most converted vans in Europe, and the figures below are the ones the whole platform is published under: Peugeot, Citroen and RAM all sell this same body. It has the lowest load floor of any van we model, 535 mm on the shorter bodies, which is the single most useful number on this page for a conversion. A lower floor is standing height you keep, which is why an L2H2 Ducato feels roomier inside than vans that are taller on paper. All seven sizes are modelled front-wheel drive.

The Fiat Ducato is the same vehicle as the Peugeot Boxer, Citroën Relay, Citroën Jumper, RAM Promaster, Toyota Proace Max, Vauxhall Movano (2021 on) and Opel Movano (2021 on). Same body, same dimensions, same weight; a different badge and grille.

See also: Peugeot Boxer dimensions, Citroën Relay dimensions, Citroën Jumper dimensions, RAM Promaster dimensions, Toyota Proace Max dimensions, Vauxhall Movano (2021 on) dimensions, Opel Movano (2021 on) dimensions.

Fiat Ducato L1H1

The Fiat Ducato L1H1 is 4,963 mm (16 ft 3 in) long, 2,050 mm (6 ft 9 in) wide and 2,254 mm (7 ft 5 in) tall, on a 3,000 mm (9 ft 10 in) wheelbase, with a load floor 535 mm (1 ft 9 in) off the ground, and 2,670 mm (8 ft 9 in) of floor behind the bulkhead. It weighs about 1,940 kg (4,277 lb) unladen.

Also known as: Short wheelbase, low roof.

Front-wheel drive

Side elevation of a Fiat Ducato L1H1
Fiat Ducato L1H1 exterior dimensions
MeasurementMetricImperial
Overall length4,963 mm16 ft 3 in
Overall width (excluding mirrors)2,050 mm6 ft 9 in
Overall height2,254 mm7 ft 5 in
Wheelbase3,000 mm9 ft 10 in
Side door opening1,250 mm4 ft 1 in
Load length at floor2,670 mm8 ft 9 in
Load floor height535 mm1 ft 9 in
Kerb weight (approximate)1,940 kg4,277 lb

Fiat Ducato L2H1

The Fiat Ducato L2H1 is 5,413 mm (17 ft 9 in) long, 2,050 mm (6 ft 9 in) wide and 2,254 mm (7 ft 5 in) tall, on a 3,450 mm (11 ft 4 in) wheelbase, with a load floor 535 mm (1 ft 9 in) off the ground, and 3,120 mm (10 ft 3 in) of floor behind the bulkhead. It weighs about 1,980 kg (4,365 lb) unladen.

Also known as: Medium wheelbase, low roof.

Front-wheel drive

Side elevation of a Fiat Ducato L2H1
Fiat Ducato L2H1 exterior dimensions
MeasurementMetricImperial
Overall length5,413 mm17 ft 9 in
Overall width (excluding mirrors)2,050 mm6 ft 9 in
Overall height2,254 mm7 ft 5 in
Wheelbase3,450 mm11 ft 4 in
Side door opening1,250 mm4 ft 1 in
Load length at floor3,120 mm10 ft 3 in
Load floor height535 mm1 ft 9 in
Kerb weight (approximate)1,980 kg4,365 lb

Fiat Ducato L2H2

The Fiat Ducato L2H2 is 5,413 mm (17 ft 9 in) long, 2,050 mm (6 ft 9 in) wide and 2,522 mm (8 ft 3 in) tall, on a 3,450 mm (11 ft 4 in) wheelbase, with a load floor 535 mm (1 ft 9 in) off the ground, and 3,120 mm (10 ft 3 in) of floor behind the bulkhead. It weighs about 2,020 kg (4,453 lb) unladen.

Also known as: Medium wheelbase, medium roof.

Front-wheel drive

Side elevation of a Fiat Ducato L2H2
Fiat Ducato L2H2 exterior dimensions
MeasurementMetricImperial
Overall length5,413 mm17 ft 9 in
Overall width (excluding mirrors)2,050 mm6 ft 9 in
Overall height2,522 mm8 ft 3 in
Wheelbase3,450 mm11 ft 4 in
Side door opening1,250 mm4 ft 1 in
Load length at floor3,120 mm10 ft 3 in
Load floor height535 mm1 ft 9 in
Kerb weight (approximate)2,020 kg4,453 lb

Fiat Ducato L3H2

The Fiat Ducato L3H2 is 5,998 mm (19 ft 8 in) long, 2,050 mm (6 ft 9 in) wide and 2,522 mm (8 ft 3 in) tall, on a 4,035 mm (13 ft 3 in) wheelbase, with a load floor 550 mm (1 ft 10 in) off the ground, and 3,705 mm (12 ft 2 in) of floor behind the bulkhead. It weighs about 2,095 kg (4,619 lb) unladen.

Also known as: Long wheelbase, medium roof.

Front-wheel drive

Side elevation of a Fiat Ducato L3H2
Fiat Ducato L3H2 exterior dimensions
MeasurementMetricImperial
Overall length5,998 mm19 ft 8 in
Overall width (excluding mirrors)2,050 mm6 ft 9 in
Overall height2,522 mm8 ft 3 in
Wheelbase4,035 mm13 ft 3 in
Side door opening1,250 mm4 ft 1 in
Load length at floor3,705 mm12 ft 2 in
Load floor height550 mm1 ft 10 in
Kerb weight (approximate)2,095 kg4,619 lb

Fiat Ducato L3H3

The Fiat Ducato L3H3 is 5,998 mm (19 ft 8 in) long, 2,050 mm (6 ft 9 in) wide and 2,760 mm (9 ft 1 in) tall, on a 4,035 mm (13 ft 3 in) wheelbase, with a load floor 550 mm (1 ft 10 in) off the ground, and 3,705 mm (12 ft 2 in) of floor behind the bulkhead. It weighs about 2,130 kg (4,696 lb) unladen.

Also known as: Long wheelbase, high roof.

Front-wheel drive

Side elevation of a Fiat Ducato L3H3
Fiat Ducato L3H3 exterior dimensions
MeasurementMetricImperial
Overall length5,998 mm19 ft 8 in
Overall width (excluding mirrors)2,050 mm6 ft 9 in
Overall height2,760 mm9 ft 1 in
Wheelbase4,035 mm13 ft 3 in
Side door opening1,250 mm4 ft 1 in
Load length at floor3,705 mm12 ft 2 in
Load floor height550 mm1 ft 10 in
Kerb weight (approximate)2,130 kg4,696 lb

Fiat Ducato L4H2

The Fiat Ducato L4H2 is 6,363 mm (20 ft 11 in) long, 2,050 mm (6 ft 9 in) wide and 2,522 mm (8 ft 3 in) tall, on a 4,035 mm (13 ft 3 in) wheelbase, with a load floor 550 mm (1 ft 10 in) off the ground, and 4,070 mm (13 ft 4 in) of floor behind the bulkhead. It weighs about 2,235 kg (4,927 lb) unladen.

Also known as: Extra-long wheelbase, medium roof; Maxi.

Front-wheel drive

Side elevation of a Fiat Ducato L4H2
Fiat Ducato L4H2 exterior dimensions
MeasurementMetricImperial
Overall length6,363 mm20 ft 11 in
Overall width (excluding mirrors)2,050 mm6 ft 9 in
Overall height2,522 mm8 ft 3 in
Wheelbase4,035 mm13 ft 3 in
Side door opening1,250 mm4 ft 1 in
Load length at floor4,070 mm13 ft 4 in
Load floor height550 mm1 ft 10 in
Kerb weight (approximate)2,235 kg4,927 lb

Fiat Ducato L4H3

The Fiat Ducato L4H3 is 6,363 mm (20 ft 11 in) long, 2,050 mm (6 ft 9 in) wide and 2,760 mm (9 ft 1 in) tall, on a 4,035 mm (13 ft 3 in) wheelbase, with a load floor 550 mm (1 ft 10 in) off the ground, and 4,070 mm (13 ft 4 in) of floor behind the bulkhead. It weighs about 2,270 kg (5,004 lb) unladen.

Also known as: Extra-long wheelbase, high roof; Maxi.

Front-wheel drive

Side elevation of a Fiat Ducato L4H3
Fiat Ducato L4H3 exterior dimensions
MeasurementMetricImperial
Overall length6,363 mm20 ft 11 in
Overall width (excluding mirrors)2,050 mm6 ft 9 in
Overall height2,760 mm9 ft 1 in
Wheelbase4,035 mm13 ft 3 in
Side door opening1,250 mm4 ft 1 in
Load length at floor4,070 mm13 ft 4 in
Load floor height550 mm1 ft 10 in
Kerb weight (approximate)2,270 kg5,004 lb

Every Fiat Ducato version, side by side

7 sizes, with the manufacturer's published overall figures side by side. Each one is drawn and specified in full above, in both metric and imperial.

Fiat Ducato exterior dimensions by version
VersionLengthWidthHeightWheelbaseLoad lengthLoad floorKerb weight
L1H14,963 mm16 ft 3 in2,050 mm6 ft 9 in2,254 mm7 ft 5 in3,000 mm9 ft 10 in2,670 mm8 ft 9 in535 mm1 ft 9 in1,940 kg4,277 lb
L2H15,413 mm17 ft 9 in2,050 mm6 ft 9 in2,254 mm7 ft 5 in3,450 mm11 ft 4 in3,120 mm10 ft 3 in535 mm1 ft 9 in1,980 kg4,365 lb
L2H25,413 mm17 ft 9 in2,050 mm6 ft 9 in2,522 mm8 ft 3 in3,450 mm11 ft 4 in3,120 mm10 ft 3 in535 mm1 ft 9 in2,020 kg4,453 lb
L3H25,998 mm19 ft 8 in2,050 mm6 ft 9 in2,522 mm8 ft 3 in4,035 mm13 ft 3 in3,705 mm12 ft 2 in550 mm1 ft 10 in2,095 kg4,619 lb
L3H35,998 mm19 ft 8 in2,050 mm6 ft 9 in2,760 mm9 ft 1 in4,035 mm13 ft 3 in3,705 mm12 ft 2 in550 mm1 ft 10 in2,130 kg4,696 lb
L4H26,363 mm20 ft 11 in2,050 mm6 ft 9 in2,522 mm8 ft 3 in4,035 mm13 ft 3 in4,070 mm13 ft 4 in550 mm1 ft 10 in2,235 kg4,927 lb
L4H36,363 mm20 ft 11 in2,050 mm6 ft 9 in2,760 mm9 ft 1 in4,035 mm13 ft 3 in4,070 mm13 ft 4 in550 mm1 ft 10 in2,270 kg5,004 lb

Lengths exclude mirrors. Kerb weight is approximate - see how these figures were sourced at the bottom of the page.

How to read these figures

Kerb weights are researched from published manufacturer data, read on 5 August 2026. Basis: 2.2 MultiJet 120 diesel, 3500 kg (35) GVW, FWD, base spec.

Kerb weight (curb weight in North America) is the unladen mass in running order (all fluids, a 90% full fuel tank and a 75 kg driver), for a base-specification panel van at around 3.5 t gross. It is researched and approximate: a real van with options fitted will weigh more, and VanCAD lets you edit the figure on your own design.

Load length is the manufacturer's published floor length behind the bulkhead, measured at floor level in the bare van. Lining, battens and a false floor all take from it, and the figure says nothing about the height or width available above it.

One interior figure is published here, and it is the manufacturer's own: the load length at floor. Everything else about the inside of the van is deliberately absent. VanCAD's interior shapes come from traced reference models, so our own figures for load height, load width or the gap between the wheel arches would be wrong at the precision somebody cutting a bed frame needs, and a cited-and-wrong number is worse than none. Whether a given bed, shower or bike fits is a question the 3D tool answers by putting it in the van.

VanCAD models the mainstream panel van bodies and drive layouts for each van, not every factory option. A maker may also sell four-wheel-drive, chassis-cab or crew-van versions that are not listed here, so anything on this page about which layouts a van comes in describes the versions VanCAD offers rather than the maker's full range.

Source: www.fiatprofessional.com

Will your layout fit?

Load a Fiat Ducato into the browser, place a bed, a kitchen and a shower at real millimetre sizes, and read back the weight you have added. Free, with no install.