VanCAD
Open the app

Iveco Daily vs Opel Movano (2021 on)

This page compares the Iveco Daily L3H2 with the Opel Movano (2021 on) L3H2. Choose any other size of either below. The Opel Movano (2021 on) is 182 mm7 in shorter, 138 mm5 in lower and 40 mm2 in wider than the Iveco Daily. The Opel Movano (2021 on) has 165 mm6 in more load length at the floor and a wheelbase 515 mm1 ft 8 in longer.

VanCAD models the Iveco Daily in 9 sizes (L1H1, L2H1, L2H2, L3H2, L3H3, L4H2, L4H3, L5H2, L5H3), from 5,198 mm17 ft 1 in to 7,680 mm25 ft 2 in long and 2,314 mm7 ft 7 in to 2,860 mm9 ft 5 in tall, with rear-wheel drive. VanCAD models the Opel Movano (2021 on) in 7 sizes (L1H1, L2H1, L2H2, L3H2, L3H3, L4H2, L4H3), from 4,963 mm16 ft 3 in to 6,363 mm20 ft 11 in long and 2,254 mm7 ft 5 in to 2,760 mm9 ft 1 in tall, with front-wheel drive. The Opel Movano (2021 on) is also sold as the Fiat Ducato, the Peugeot Boxer, the Citroën Relay, the Citroën Jumper, the RAM Promaster, the Toyota Proace Max and the Vauxhall Movano (2021 on).

First van

Iveco Daily L3H2

Full dimensions
Second van

Opel Movano (2021 on) L3H2

Full dimensions

Side profiles at one scale

View
Line up by
Iveco Daily L3H2
Side profile of the Iveco Daily L3H2
Opel Movano (2021 on) L3H2
Side profile of the Opel Movano (2021 on) L3H2
  • Iveco Daily L3H2
  • Opel Movano (2021 on) L3H2
  • Both

Lined up at the rear doors. The drawings leave off the rear bumper, so this is the line the load space ends at.

Drawn from VanCAD's 3D models at one scale, with the ground lines level. The figures in the table are the manufacturers' published ones: read a measurement from the table, not the picture.

Side profiles at one scale

The published figures

Iveco Daily L3H2 and Opel Movano (2021 on) L3H2 compared
MeasurementIveco Daily L3H2Opel Movano (2021 on) L3H2Difference
Overall length6,180 mm20 ft 3 in5,998 mm19 ft 8 in182 mm shorter7 in shorter
Overall width (excluding mirrors)2,010 mm6 ft 7 in2,050 mm6 ft 9 in40 mm wider2 in wider
Overall height2,660 mm8 ft 9 in2,522 mm8 ft 3 in138 mm lower5 in lower
Wheelbase3,520 mm11 ft 7 in4,035 mm13 ft 3 in515 mm longer1 ft 8 in longer
Rear overhang1,519 mm5 ft1,015 mm3 ft 4 in504 mm shorter1 ft 8 in shorter
Ground clearance190 mm0 ft 7 in165 mm0 ft 6 in25 mm less1 in less
Side door opening1,200 mm3 ft 11 in1,250 mm4 ft 1 in50 mm wider2 in wider
Load length at floor3,540 mm11 ft 7 in3,705 mm12 ft 2 in165 mm longer6 in longer
Maximum internal load width1,800 mm5 ft 11 in1,870 mm6 ft 2 in70 mm wider3 in wider
Maximum internal load height1,900 mm6 ft 3 in1,932 mm6 ft 4 in32 mm higher1 in higher
Load floor height695 mm2 ft 3 in550 mm1 ft 10 in145 mm lower6 in lower
Kerb weight (approximate)2,360 kg5,203 lb2,095 kg4,619 lb265 kg lighter584 lb lighter
Gross vehicle weight (example rating)3,500 kg7,716 lb3,500 kg7,716 lbSameSame
Payload (approximate)1,140 kg2,513 lb1,405 kg3,097 lb265 kg more584 lb more
DriveRear-wheel driveRear-wheel driveFront-wheel driveFront-wheel driveDifferentDifferent
Design this vanDesign this van

The difference column reads the Opel Movano (2021 on) L3H2 against the Iveco Daily L3H2: "longer" means the Opel Movano (2021 on) L3H2 is the longer of the two.

How to read these figures

Kerb weight (curb weight in North America) is the unladen mass in running order (all fluids, a 90% full fuel tank and a 75 kg driver), for a base-specification panel van. It is researched and approximate: a real van with options fitted will weigh more, and VanCAD lets you edit the figure on your own design.

Gross vehicle weight is the maximum permitted total weight of the loaded van. Approximate payload is the example gross weight shown above minus our researched kerb weight. The kerb weight already includes a 75 kg driver. The remaining allowance covers the conversion, other occupants, water and luggage, plus any driver weight above 75 kg. Weight ratings, engines and options vary; check your own vehicle's weight plate and axle limits. A converted van's real remaining allowance comes from a weighbridge, weighed ready to travel.

Load length is the manufacturer's published floor length behind the bulkhead, measured at floor level in the bare van. Lining, battens and a false floor all take from it, and the figure says nothing about the height or width available above it.

Interior figures are the manufacturer's published load length at floor, maximum internal load width and maximum internal load height, where available. These are before conversion: lining, insulation and flooring reduce usable space, and maximum dimensions do not apply everywhere inside the van. Check your own vehicle before cutting or building. VanCAD's traced interior shapes are illustrative and are never used as published measurements.

VanCAD models the mainstream panel van bodies and drive layouts for each van, not every factory option. A maker may also sell four-wheel-drive, chassis-cab or crew-van versions that are not listed here, so anything on this page about which layouts a van comes in describes the versions VanCAD offers rather than the maker's full range.

Will your layout fit?

Open either van in the browser, place a bed, a kitchen and a shower at real millimetre sizes, and read back the weight you have added. Free, with no install.