Volkswagen Caddy (pre-2020) vs Volkswagen Transporter (T6.1)
This page compares the Volkswagen Caddy (pre-2020) Maxi with the Volkswagen Transporter (T6.1) L1H1. Choose any other size of either below. The Volkswagen Transporter (T6.1) is 26 mm1 in longer, 154 mm6 in taller and 111 mm4 in wider than the Volkswagen Caddy (pre-2020). The Volkswagen Transporter (T6.1) has 323 mm1 ft 1 in more load length at the floor and a wheelbase 6 mmunder 1 in shorter.
VanCAD models the Volkswagen Caddy (pre-2020) in 2 sizes (SWB, Maxi), from 4,408 mm14 ft 6 in to 4,878 mm16 ft long and 1,823 mm6 ft to 1,836 mm6 ft tall, with front-wheel drive. VanCAD models the Volkswagen Transporter (T6.1) in 3 sizes (L1H1, L2H1, L2H2), from 4,904 mm16 ft 1 in to 5,304 mm17 ft 5 in long and 1,990 mm6 ft 6 in to 2,477 mm8 ft 2 in tall, with front-wheel drive.
Side profiles at one scale
- Volkswagen Caddy (pre-2020) Maxi
- Volkswagen Transporter (T6.1) L1H1
- Both
Lined up at the rear doors. The drawings leave off the rear bumper, so this is the line the load space ends at.
Drawn from VanCAD's 3D models at one scale, with the ground lines level. The figures in the table are the manufacturers' published ones: read a measurement from the table, not the picture.
The published figures
| Measurement | Volkswagen Caddy (pre-2020) Maxi | Volkswagen Transporter (T6.1) L1H1 | Difference |
|---|---|---|---|
| Overall length | 4,878 mm16 ft | 4,904 mm16 ft 1 in | 26 mm longer1 in longer |
| Overall width (excluding mirrors) | 1,793 mm5 ft 11 in | 1,904 mm6 ft 3 in | 111 mm wider4 in wider |
| Overall height | 1,836 mm6 ft | 1,990 mm6 ft 6 in | 154 mm taller6 in taller |
| Wheelbase | 3,006 mm9 ft 10 in | 3,000 mm9 ft 10 in | 6 mm shorterunder 1 in shorter |
| Rear overhang | 993 mm3 ft 3 in | 996 mm3 ft 3 in | 3 mm longerunder 1 in longer |
| Ground clearance | 175 mm0 ft 7 in | 180 mm0 ft 7 in | 5 mm moreunder 1 in more |
| Side door opening | 701 mm2 ft 4 in | 1,020 mm3 ft 4 in | 319 mm wider1 ft 1 in wider |
| Load length at floor | 2,249 mm7 ft 5 in | 2,572 mm8 ft 5 in | 323 mm longer1 ft 1 in longer |
| Maximum internal load width | 1,532 mm5 ft | 1,700 mm5 ft 7 in | 168 mm wider7 in wider |
| Maximum internal load height | 1,259 mm4 ft 2 in | 1,410 mm4 ft 8 in | 151 mm higher6 in higher |
| Load floor height | 588 mm1 ft 11 in | 568 mm1 ft 10 in | 20 mm lower1 in lower |
| Kerb weight (approximate) | 1,467 kg3,234 lb | 1,884 kg4,154 lb | 417 kg heavier920 lb heavier |
| Gross vehicle weight (example rating) | 2,299 kg5,068 lb | 2,800 kg6,173 lb | 501 kg more1,105 lb more |
| Payload (approximate) | 832 kg1,834 lb | 916 kg2,019 lb | 84 kg more185 lb more |
| Drive | Front-wheel driveFront-wheel drive | Front-wheel driveFront-wheel drive | SameSame |
| Design this van | Design this van |
The difference column reads the Volkswagen Transporter (T6.1) L1H1 against the Volkswagen Caddy (pre-2020) Maxi: "longer" means the Volkswagen Transporter (T6.1) L1H1 is the longer of the two.
More comparisons
Other comparisons with the Volkswagen Caddy (pre-2020) or the Volkswagen Transporter (T6.1).
- Volkswagen Transporter (T6.1) vs Volkswagen Transporter (T7)
- Renault Trafic vs Volkswagen Transporter (T6.1)
- Toyota HiAce vs Volkswagen Transporter (T6.1)
- Vauxhall Vivaro vs Volkswagen Transporter (T6.1)
- Opel Vivaro vs Volkswagen Transporter (T6.1)
- Nissan NV300 vs Volkswagen Transporter (T6.1)
- Nissan Primastar vs Volkswagen Transporter (T6.1)
- Fiat Talento vs Volkswagen Transporter (T6.1)
- Ford Transit Custom vs Volkswagen Transporter (T6.1)
- Ford Transit Connect vs Volkswagen Caddy (pre-2020)
- Volkswagen Caddy Cargo (2020 on) vs Volkswagen Caddy (pre-2020)
- Volkswagen Transporter (T6.1) vs Volkswagen Crafter
How to read these figures
Kerb weight (curb weight in North America) is the unladen mass in running order (all fluids, a 90% full fuel tank and a 75 kg driver), for a base-specification panel van. It is researched and approximate: a real van with options fitted will weigh more, and VanCAD lets you edit the figure on your own design.
Gross vehicle weight is the maximum permitted total weight of the loaded van. Approximate payload is the example gross weight shown above minus our researched kerb weight. The kerb weight already includes a 75 kg driver. The remaining allowance covers the conversion, other occupants, water and luggage, plus any driver weight above 75 kg. Weight ratings, engines and options vary; check your own vehicle's weight plate and axle limits. A converted van's real remaining allowance comes from a weighbridge, weighed ready to travel.
Load length is the manufacturer's published floor length behind the bulkhead, measured at floor level in the bare van. Lining, battens and a false floor all take from it, and the figure says nothing about the height or width available above it.
Interior figures are the manufacturer's published load length at floor, maximum internal load width and maximum internal load height, where available. These are before conversion: lining, insulation and flooring reduce usable space, and maximum dimensions do not apply everywhere inside the van. Check your own vehicle before cutting or building. VanCAD's traced interior shapes are illustrative and are never used as published measurements.
VanCAD models the mainstream panel van bodies and drive layouts for each van, not every factory option. A maker may also sell four-wheel-drive, chassis-cab or crew-van versions that are not listed here, so anything on this page about which layouts a van comes in describes the versions VanCAD offers rather than the maker's full range.
Will your layout fit?
Open either van in the browser, place a bed, a kitchen and a shower at real millimetre sizes, and read back the weight you have added. Free, with no install.