Volkswagen Caddy Cargo (2020 on) vs Volkswagen Caddy (pre-2020)
This page compares the Volkswagen Caddy Cargo (2020 on) Maxi with the Volkswagen Caddy (pre-2020) Maxi. Choose any other size of either below. The Volkswagen Caddy (pre-2020) is 27 mm1 in longer, 9 mmunder 1 in taller and 62 mm2 in narrower than the Volkswagen Caddy Cargo (2020 on). The Volkswagen Caddy (pre-2020) has 99 mm4 in more load length at the floor and a wheelbase 36 mm1 in longer.
VanCAD models the Volkswagen Caddy Cargo (2020 on) in 2 sizes (SWB, Maxi), from 4,498 mm14 ft 9 in to 4,851 mm15 ft 11 in long and 1,823 mm6 ft to 1,827 mm6 ft tall, with front-wheel drive. VanCAD models the Volkswagen Caddy (pre-2020) in 2 sizes (SWB, Maxi), from 4,408 mm14 ft 6 in to 4,878 mm16 ft long and 1,823 mm6 ft to 1,836 mm6 ft tall, with front-wheel drive.
Side profiles at one scale
- Volkswagen Caddy Cargo (2020 on) Maxi
- Volkswagen Caddy (pre-2020) Maxi
- Both
Lined up at the rear doors. The drawings leave off the rear bumper, so this is the line the load space ends at.
Drawn from VanCAD's 3D models at one scale, with the ground lines level. The figures in the table are the manufacturers' published ones: read a measurement from the table, not the picture.
The published figures
| Measurement | Volkswagen Caddy Cargo (2020 on) Maxi | Volkswagen Caddy (pre-2020) Maxi | Difference |
|---|---|---|---|
| Overall length | 4,851 mm15 ft 11 in | 4,878 mm16 ft | 27 mm longer1 in longer |
| Overall width (excluding mirrors) | 1,855 mm6 ft 1 in | 1,793 mm5 ft 11 in | 62 mm narrower2 in narrower |
| Overall height | 1,827 mm6 ft | 1,836 mm6 ft | 9 mm tallerunder 1 in taller |
| Wheelbase | 2,970 mm9 ft 9 in | 3,006 mm9 ft 10 in | 36 mm longer1 in longer |
| Rear overhang | 994 mm3 ft 3 in | 993 mm3 ft 3 in | 1 mm shorterunder 1 in shorter |
| Ground clearance | 182 mm0 ft 7 in | 175 mm0 ft 7 in | 7 mm lessunder 1 in less |
| Side door opening | 695 mm2 ft 3 in | 701 mm2 ft 4 in | 6 mm widerunder 1 in wider |
| Load length at floor | 2,150 mm7 ft 1 in | 2,249 mm7 ft 5 in | 99 mm longer4 in longer |
| Maximum internal load width | 1,614 mm5 ft 4 in | 1,532 mm5 ft | 82 mm narrower3 in narrower |
| Maximum internal load height | 1,264 mm4 ft 2 in | 1,259 mm4 ft 2 in | 5 mm lowerunder 1 in lower |
| Load floor height | 593 mm1 ft 11 in | 588 mm1 ft 11 in | 5 mm lowerunder 1 in lower |
| Kerb weight (approximate) | 1,591 kg3,508 lb | 1,467 kg3,234 lb | 124 kg lighter274 lb lighter |
| Gross vehicle weight (example rating) | 2,300 kg5,071 lb | 2,299 kg5,068 lb | 1 kg less3 lb less |
| Payload (approximate) | 709 kg1,563 lb | 832 kg1,834 lb | 123 kg more271 lb more |
| Drive | Front-wheel driveFront-wheel drive | Front-wheel driveFront-wheel drive | SameSame |
| Design this van | Design this van |
The difference column reads the Volkswagen Caddy (pre-2020) Maxi against the Volkswagen Caddy Cargo (2020 on) Maxi: "longer" means the Volkswagen Caddy (pre-2020) Maxi is the longer of the two.
More comparisons
Other comparisons with the Volkswagen Caddy Cargo (2020 on) or the Volkswagen Caddy (pre-2020).
- Ford Transit Connect vs Volkswagen Caddy (pre-2020)
- Ford Transit Connect vs Volkswagen Caddy Cargo (2020 on)
- Volkswagen Caddy (pre-2020) vs Volkswagen Transporter (T6.1)
- Volkswagen Caddy Cargo (2020 on) vs Volkswagen Transporter (T6.1)
- Volkswagen Caddy (pre-2020) vs Volkswagen Transporter (T7)
- Volkswagen Caddy Cargo (2020 on) vs Volkswagen Transporter (T7)
- Volkswagen Caddy (pre-2020) SWB vs Maxi
- Volkswagen Caddy Cargo (2020 on) SWB vs Maxi
How to read these figures
Kerb weight (curb weight in North America) is the unladen mass in running order (all fluids, a 90% full fuel tank and a 75 kg driver), for a base-specification panel van. It is researched and approximate: a real van with options fitted will weigh more, and VanCAD lets you edit the figure on your own design.
Gross vehicle weight is the maximum permitted total weight of the loaded van. Approximate payload is the example gross weight shown above minus our researched kerb weight. The kerb weight already includes a 75 kg driver. The remaining allowance covers the conversion, other occupants, water and luggage, plus any driver weight above 75 kg. Weight ratings, engines and options vary; check your own vehicle's weight plate and axle limits. A converted van's real remaining allowance comes from a weighbridge, weighed ready to travel.
Load length is the manufacturer's published floor length behind the bulkhead, measured at floor level in the bare van. Lining, battens and a false floor all take from it, and the figure says nothing about the height or width available above it.
Interior figures are the manufacturer's published load length at floor, maximum internal load width and maximum internal load height, where available. These are before conversion: lining, insulation and flooring reduce usable space, and maximum dimensions do not apply everywhere inside the van. Check your own vehicle before cutting or building. VanCAD's traced interior shapes are illustrative and are never used as published measurements.
VanCAD models the mainstream panel van bodies and drive layouts for each van, not every factory option. A maker may also sell four-wheel-drive, chassis-cab or crew-van versions that are not listed here, so anything on this page about which layouts a van comes in describes the versions VanCAD offers rather than the maker's full range.
Will your layout fit?
Open either van in the browser, place a bed, a kitchen and a shower at real millimetre sizes, and read back the weight you have added. Free, with no install.